Skip to page content

Portable IoT soil scanner

What is the Agni soil scanner?

Agni is a portable IoT soil scanner developed within the Mitti-AI ecosystem. It currently measures seven soil parameters in approximately 45 seconds without chemical reagents, then transfers the readings by Bluetooth Low Energy to Saathi AI.

7 current parameters~45s scan workflow BLE transfer

One field scan

The seven readings currently reported

Every reading still needs the sample, conditions, measurement method and intended decision around it.

pH
electrical conductivity
nitrogen
phosphorus
potassium
moisture
temperature

Designed for a simple field workflow

Place. Scan. Transfer. Interpret.

  1. Place the probeFollow the device workflow for the sampled area.
  2. Run the scanThe current scan flow takes approximately 45 seconds.
  3. Transfer by BLEReadings move to the farmer-facing platform.
  4. Add contextMegha and Saathi AI support explanation and discussion.

Field workflow

  • Prepare and position the device according to the current device instructions.
  • Run a scan; the current measurement cycle takes approximately 45 seconds.
  • Transfer the seven readings to Saathi AI through BLE.
  • Review the result and localized guidance in context before acting.

What is not being claimed

This page does not claim laboratory equivalence, a universal accuracy percentage, certification, regulatory approval or measurement of parameters beyond the seven listed above. Validation scope and limitations should be published as evidence becomes available.